Hybrid(Windows/Linux): Input -> x264/Xvid/VP8 |
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.05.05.1
*fixed*
- vfw: fixed vfw video decoder detection on 64bit systems
- profiles: profiles with a '.' in the name weren't detected when saved,...
- muxing: accidentally frame count made it's way into the fps options,..
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
05.05.2012 10:48 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.05.08.1:
*fixed*
- audio: extraction audio from .avi with mplayer
- audio: added '-strict experimantal' to the ffmpeg aac encoding calls (mac only)
- audio: crash on rename call after reencoding/extration
- audio: problem when fhgaacenc was enabled but not aac encoding
- tools: delaycut version detection fixed
- automation: autocrop and subtitle passthrough interfered,..
- muxing: mkvmerge does not support 'iw' as language, added workaround to change 'iw' to 'he'
- muxing: accidentally frame count made it's way into the fps options,..
- avisynth: changing qtgmc->bob didn't change the displayer lables (encoding was fine -> just a cosmetic bug)
- handling: handling of vfr mkv/mp4 files (remember to enable: 'Config->Automation->Matroska Settings->Scan for streched streams' and 'Config->Input settings->General settings->Always extract timecodes from mp4/mkv/ files' for vfr handling)
*added*
- input: option to filter out unwanted content by extension (files with the specified extensions will be ignored)
- input: drag&drop now accepts folders (in File input mode) and will also search through all sub-folder for content
*changed*
- analysis: speed up interlaced analysis by adding lavthreads
- package: switching to an older mplayer/mencoder build since latest builds cause problems (windows only)
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
08.05.2012 21:55 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2012.05.10.1:
*fixed*
- audio: ac3 sample rate/channel count/bitrate combinations, before some non-valid combinations were offered.
- analysis: automation - subtitle extraction + interlaced check could cause to Hybrid to stay grayed out
- subs: Hybrid now automatically creates necessary mplayer/fontconfig files; otherwise subtitle preview and embedding does not work (mac only)
- muxing: timecode handling for vfr->vfr
*changed*
- analysis: speed up interlaced analysis by adding lavthreads
*added*
- input: option to specify which files Hybrid will support as input (by extension)
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
10.05.2012 18:53 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.05.20.1:
*fixed*
- input: auto crop detection not working properly on transport stream containers
- preview: audio got disabled after "Filter View" was triggered the 1st time
- automation: rewrote a lot of code to handle the interactions of 'auto crop', 'pass-through subtitle', 'auto interlaced check'
- input: stream selection didn't work properly for multiple video input files
- input: better handling or blu-ray input and multi video input files
- muxing: problem with mov muxing (on Mac OS X)
*added*
- outputPath and temPath variables are now read from .ini if present
*changed*
- deinterlace: auto deinterlacing will only change the deinterlaced if the content is detected as interlaced and the
- deinterlacer is ment for IVTC or the content is telecine and the deinterlacer is ment for deinterlacing.
- output: avi output is allowed again, as a workaround to the ffmpeg bug, I'm trying to avoid to mux raw MPEG-4 ASP to .avi; Warning: if you use Hybrid to multiplex raw MPEG-4 ASP video into an .avi file, the output container flags will be wrong.
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
20.05.2012 12:19 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.05.23.1
*fixed*
- analyse: mplayer detecting unsupported audio streams
- filtering: bug in fraction<>decimal conversion
- chapter: visual chapter point selection
- cut: dvd cut support
- audio: using ffmpegs internal encoder & sox caused output to be mono
*changed*
- audio: now automatically fix audio streams with delaycut, if DVD is source and target is mp4 file
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
23.05.2012 17:58 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.5.31.1
*fixed*
- input: dvd title selection not correct when dummy tracks were detected
- audio: lame encoding was called even when lame was not present
- general: fixed some problems when temp/output dir was empty
*added*
- cosmetics: mac os progress indication on dock icon
- muxing: option to add itunes compatible subtitle infos
- tools: checks if ffmpeg/mencoder support mp3lame/vorbis/aac encoding
- audio: support for external faac/lame binaries
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
31.05.2012 22:08 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2012.06.01.1:
*fixed*
- analyse: loading dvd input (was probably only broken on windows)
- subtitle: extracting subtitles in the subtitle tab
*changed*
- autocrop: limit amount of frames scanned for mpls files which link to multiple m2ts files
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
01.06.2012 16:54 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.06.02.1
*fixed*
- subtitle: 'Add' did not add elements to queue (when not used through automation routine)
- subtitle: subtitles sometimes were created a wrong location
- extraction: (mac only) exchanged mkvtoolnix with a newer version (still 5.5.0), which already includes the .264 extraction fix
*added*
- avisynth: added STPresso
- muxing: option to add (multiple) audio, subtitle streams and chapters in an iTunes compatible way
*changed*
- autocrop: tweaked autocrop for mpls/m2ts files
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
03.06.2012 07:09 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.06.28.1
*added*
- audio: 7.1 to stereo/5.1 down mix
- muxing: option to add (multiple) audio and subtitle streams in a itunes compatible way (mp4 output will also be renamed to m4v)
- avisynth: added 'field matching' option to handle content that needs field matching
- avisynth: option to disable ffmpegsource single-thread enforcement (you might want to update the avisynth extension)
*fixed*
- subtitles: subtitles were not always properly save as UTF-8 which could destroy the content for unicode subtitles
- subtitle: bunch of bugs related to text subtitle to ttxt conversion
- compatibility: accidentally 29.976 instead of 29.97 was used
- input: differentiate between m4v as mp4 container and raw MPEG-4 ASP
- audio: problem when reencode thd audio without an ac3 core
- audio: delaycut progress
- audio: handling of ogg vorbis audio
- automation: loop while extracting subtitles/audio infos from input
- mkv: using MediaInfos StreamOrder info instead of the ID for mkv versions 0.5.2+
*changed*
- resize: 'keep resize for source' is automatically forced for multiInput
- audio: custom audio handling on multiInput now allows to specify which audio handling for which source,...
- audio: 7.1 to stereo/5.1 down mix
- muxing: option to add (multiple) audio and subtitle streams in a itunes compatible way (mp4 output will also be renamed to m4v)
- cut: adjusting time codes when cutting
- extract/cut: when cutting mkv material 1st cut with mkvmerge than extract with mkvextract, than remux
- subtitle: rename tsMuxeR subtitle output files to contain subtitle language
- subtitle: when 'All subtitles' is enabled, for transport and mkv streams all subtitles will now be extracted in one go
*Side notes*
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
28.06.2012 10:14 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.07.04.1
*fixed*
- profiles: saving a-v combo / audio profiles
- profiles: a-v combo profiles not always showing up in Main-tab
- input: handling of mkv files with no frame count/rate/mode info
- input: crash when loading some files combined with auto routines,...
- avisynth: embedding of multiple subtitle sometimes caused a crash
*added*
- gimmick: iso creation for Blu-ray/AVCHD if imgBurn is installed on the system and Main->Structure is enabled
- model: added option to tell Hybrid to warn if current Config-settings differ from the default Config-settings,...
*changed*
- x264: allow to specify a profile even when level is 'unrestricted'
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
04.07.2012 15:01 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.08.25.1
*fixed*
- thumbs: fixed crash if thumb nail creation was active for audio only jobs
- subtitle: overwriting font size didn't work
- subtitle: ssa subtitle accidently got .srt extension during extraction
- subtitle: subtitle language tagging sometimes did not work properly
- subtitle: filtering of subtitle queue for Blu-ray
- input: handling of mkv files with no frame count/rate/mode info
- avisynth: disable MT support if TextSub is used
- avisynth: option to disable ffmpegsource single-thread enforcement
- avisynth: srt subtitle styling
- preview: subtitle style overwriting not always viewable in preview
- timecode: if the last time code entry is a zero, it will be removed
- analyse: crash when MediaInfo detected 'Original Frame rate'- and no 'Frame rate'-info.
- avc: sometimes avcLevel restriction got triggered with input instead of output resolution
- job: Blu-ray + 'Queue Titles'
- audio: dts-hd channel count 8 / 6 detected as 6 instead of 8
- audio: automatically call to5.1 if input has 7.1 channels and output is ac3/dts
- x264: crash when enabling 'minimize AVC Level'
- x264: crf as zone option
- x264: output naming broke if output x264-10bit/9bit was used and output name/folder contained x264 in it.
- x264: progress to newest changes in r2204
- input: mac build ignoring keyboard input
*added*
- subtitle: option to enforce subtitling through mencoder even when avisynth filters are used
- joblist: option to get via right-click to the output folder
- warning: splitting from avi/mov/raw output is not supported atm.
- muxing: option to create a 1min sample file from the middle during mkv creation
- cuda: option to specify which gpu is used
*changed*
- general: lowered mplayer/mencoder lavdthreads count to a maximum of 8 again
- general: disable qaac support if Apple Application Support is not installed (comes with Quicktime and/or iTunes)
- avisynth: added option to en-/disable if Hybrid converts .srt subtitles to .ass before embedding
- analyse: read analyzer output as utf-8 encoded
- analyse: MediaInfo detecteds 'Original Frame rate'- but no 'Frame rate'-info, 'Frame rate' is set to the value of 'Frame rate'
- subtitle: copy subtitle to tempPath before using
- audio: allow vbr preset 6 when fhgaacenc version >= 20120624
- audio: remove qaac if 'Apple Application Support' is not installed
- audio: remove fhgaacenc if WinAmp is not installed and the necessary libraries are also not present in the Hybrid folder
- audio: added warning when trying to encode 7.1 audio (can't be done with Hybrid since none of it's decoders can handle 7.1 input audio properly)
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
25.08.2012 18:49 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.08.29.1
*fixed*
- x264: command line import didn't enable 'x264->Main->Restriction Settings->Hardware' when importing '--bluray-compat'
- audio: don't do truehd->wav conversion, just because delaycut is enabled
- audio: typo/formating when extraction audio with mplayer
- decode: making sure ffmpeg also disables subtitles during decoding
- preview: avisynth filtering was used in preview even if video was set to 'ignore' or 'passthrough'
*added*
- analysis: option to select whether or not Hybrid will use 'Original pixel aspect ratio' or 'Pixel aspect ratio' when both are presented through the MediaInfo-analyzer
*changed*
- tools: recheck tool version when the path to the tool was changed manually.
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
29.08.2012 17:44 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.09.09.1
*fixed*
- audio: ffmpeg->sox->ffmpeg problem (happend during audio encoding through ffmpeg)
- audio: audio pcm vs. wav extension problem
- audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
- avisynth: tresh bei sRestore, had wrong value ranges
- avisynth: basic sRestore-Support (remember to update the avisynthExtension)
- cut: some cut-support related problems
- filter: framecount: didn't adjust frame count due to deinterlacing&co
- input: chapter selection vs. start/end time problem
- thumb: undid some changes from last time,..
- audio: adjusted Hybrid to handle completely silent audio streams (crashed since normalization&autogain didn't work)
*added*
- audio: support for fdk-aac, due to license issues this is only useful for people who compile their own ffmpeg version with fdk-aac support
- audio: 'dynamic range compression'-option, thanks to tebasuna51 who implemented some profiles for BeHappy which I now integrated into Hybrids sox options.
- avisynth: TemporalDegrain as grainHandling option
- avisynth: option to move deblocking before the deinterlacing block if an avisynth deinterlacer is used
- avisynth: 'Show avisynth script'-button some one can have a look at the avisynth script Hybrid generates.
- misc: additional paths to search for tools by specifying 'toolPaths' in the misc.ini
*changed*
- audio: communication between sox and ffmpeg will now be done using the sox format (otherwise sox->ffmpeg seems to make problems on some sources)
- audio: added '--threading' to qaac calls
- audio: by default set 'Multithreading for sox' to be enabled
- analyse: ignore mplayer video ids of typ png/mjpeg if input is an mp4/mov file; otherwise cover art get's interpreted as video stream
- cut: adjust cut start/end times when chapter selection changed
- audio: removed unneeded addional '--multi-threaded' in sox call if multithreading is enabled (cosmetics only)
- infos: video 'SpeedUp' value not displayed (cosmetics only)
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
09.09.2012 22:56 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.10.16.1
*fixed*
- audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
- cosmetics: F10-log showing in left corner on linux&mac systems was broken
- video: calculation of maxLevel (4.0 wasn't identified as 4)
- avisynth: fft3dgpu needs SetMode(5)
- x264: when '--aq-mode 2' was selected '--aq-strength' got ignored,..
- job: 'on queue finished' 'call external', allows to specify a command call Hybrid will execute once the queue is finished
- config: device root wasn't accepted as valid path
- audio: during batch processing audio queue was cleared to early
- mkv: option to extract&passthrough attachements
- input: auto routines aborted if an raw audio stream was present
- input: DivX3.x was falsely detected as MPEG-4 (and it isn't mpeg-4 asp compatible)
- input: mp4 vfr handling (mp4fpsmod update)
- x264: making sure that only on 32bit systems avisynth scripts can be directly opened through x264
*added*
- mkv: options to use '--engage no_simpleblocks' and '--disable-lacing'
- crop/resize: option to select old 'autoCrop behavior' and to specify the number sections to be scanned by new behavior
- avisynth: option to specifiy order for qtgmc input
*changed*
- autocrop: change autocrop calls for some input files
- crop/resize: moved AutoCrop options to 'Crop/Resize->Misc'-subtab
- preview: added '-nocache' to mplayer call (fixes some avsynch issues with mkv files during preview)
- cosmetics: making sure long profile names to not influence the gui width
- input: removed *.m4v as raw video extension, since ipod m4v is more frequent than raw mpeg-4 asp streams
- thumbnails: resize thumbnail for anamorph output
- map MPA2L3 to mp3
- changed a lot of internals to better handle non-ANSI based filenames
-> downloads: http://www.selur.de/downloads
Cu Selur
ps.: Mac update will come some later, having some problems building the dependencies,...
__________________ Hybrid
|
|
16.10.2012 12:28 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.11.6.1
*fixed*
- analyse: fixed stretch stream length analyses when no simple blocks were present
- analyse: for multiple input, not all files were processed properly
- analyse: handling of ac3 with 22.05kHz
- analyse: Hybrid stayed grayed out when, the interlace analysis with mplayer crashed
- avisynth: tivtc output frame rate calcluation for mode 2
- avisynth: videoformat and interlaced result were mixed up :/
- audio: when settings aac profile and than changing the channel count (e.g. by changing the downmix), aac profile changed, even when not needed
- autocrop: didn't work properly for dvd input,...
- batch: during intake not all files were processed properly
- cut: cutting sometimes was ignored for the video stream (not sure if the problem is completely fixed
)
- extraction: tsMuxeR .meta files now are always coded with the current system text encoding
- filtering: once dvd and non-mod4 resolution was selected filtering was disabled, but not enabled if the crop resolution was mpd4 again
- input: auto audio loading was broken due to recent auto handling changes
- input: batch - choosing 1st video stream for all sources
- input: blu-ray input analysis
- input: dvd input analyse finished not always called
- input: crash on Windows XP with long file names
- muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
- mxuing: change speed for .avi output
- muxing: ignore empty subtitles
- muxing: tsmuxer meta files now are always coded with the current system text encoding
- preview: window height
- sample: file name mix-up during sample creation for mp4 files
- srt2ttxt: fixed file naming
- subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
- x264: VUI color adjustment depending on input
- x264: VUI color adjustment did only work if hardware restrictions were selected
- xvid: missing quotes around stats file
Adjustment works this way:
- check source contains color matrix info (if it does take the info)
- if source has no color matrix info and is
[list]
- MPEG2 assume input as BT.709
- MPEG1 assume input as BT.601
- width*height > 720 * 576, assume BT.709
- width*height <= 720 * 576, assume BT.601
[*]muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
[*]subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
[/list]
*changed*
- analyse: only allow 16/15, 8/9, 64/45, 32/27 and 1/1 as aspect ratios for vob files (DVD input)
- avisynth: use ffmpeg source for interlaced avc not DirectShowSource
- checks: allow cutting if ffmpeg is set as extractor even if input is a transport stream
- input: making sure ffmpeg is used instead of tsMuxeR to extract LATM muxed audio
- input: 'Config->Input settings->Input Extensions->Only support' now also filters the 'Main->Input File'-dialog content.
- muxing: mkvmerge: only set '--default-duration ...' if input and output fps differ, otherwise interlaced/progressive mixed content will cause problems
- video: disable cuda encoder on systems without a cuda capable card
*added*
- avisynth: option to use .d2v.bad instead of .d2v (workaround for, something that is probably a 'bug' in DGIndex)
- crop: option to color the crop width&height spin boxes red if the widht/height value is not modulo X without rest.
- decoder: option to flip rgb output when decoding is done with mencoder or avisynth
- filter: option to overwrite input scan type
- filter: "softpulldown + detc" and "softpulldown + filmdint" to handle mixed (progressive <> telecine) material
*removed*
- filter: 'ivtc' got removed, since it seems to be broken (filmdint and detc are prefered)
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
06.11.2012 14:44 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev. 2012.11.23.1
*fixed*
- audio: extraction of ac3 audio from .mpg is broken in mencoder (for at least a year!) -> Hybrid now uses mplayer instead of mencoder for the extraction of audio from .mpg files
- audio: handling of 7.1 thd audio
- audio: mkv strecth handling '.. to speed change' was broken
- audio: mkv stretch handling coding in name
- audio: normalize did not take remix into account
- crop: crop resolution was not updated properly in 'Avisynth'-Crop style
- cosmetics: on KDE based systems QTimeEdit wasn't initialized with 'hh:mm:ss' format
- filter: autocrop for dvd input
- input: dvd selection start&end time got mixed up which could cause Hybrid to always encode/passthrough the whole stream
- muxing: progress indication while muxing with ffmpeg
- subtitle: adding subtitle from dvd to mp4
- subtitle: subtitle were not deleted even if 'delete subtitle after muxing' was enabled for mp4 output
- tags: tagging was broken due to file naming changes
- x264: tune->animation could trigger Hybrid to enable b-frames in base profile
*changed*
- audio: dts-hd core extraction now also supported for mkv content
- file: language and delay extraction from file name
- filter: lower stretch stream tolerance
*added*
- audio: sox 'pitch' option as 'change pitch by'
- dependency: Hybrid now also uses FLVExtractCL cpp to extract flv timecodes infos
- output: name generation got a new option 'use chapter name'
*removed*
- audio: gain sub options, after some testing anything besides '-nb' is really useless, so switching to '-nb' and removing the option
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
23.11.2012 18:41 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2013.03.29:
*fixed*
- audio: problem with 'adjust stretch to stream fps' mkv stretch handling.
- avisynth: ivtc + multiInput
- avisynth: 'resize before filtering' didn't do anything
- avisynth: converttoyv12 before wrongly flagged interlaced material didn't use interlaced= true
- avisynth: switching between FFmpegSource2 and DGDecNV
- decode: ffmpeg + yadif bug
- cosmetics: mix up with force output and custom par
- input: mkv stretch handling detection
- input: bug while grabbing the channel mapping
- input: 'mpls ignore'-settings got ignored sometimes
- muxing: cosmetics, regarding en-/disabling overwrite frame rate
- output: problem when remuxing h.264 to mov
- preview: combination of 'FilterView' + avisynthExtension + 'Horizontal split filter preview'
- preview: normal avisynth preview as broken if input needed deinterlacing and was cropped (width only mod2); added an ugly fix by resizing to mod4 after cropping (!only for preview!)
- preview: cropView sometimes used crop- instead of input-resolution
- processing: pausing of some some calls didn't work
- subtitle: language tag got lost during srt -> ttxt conversion
- x264: limit min-keyint to max-keyint/2+1
- decode: ffmpeg + yadif (custom) bug
- gui: stay on top
*changed*
- audio: adjusted qaac audio progress indication to newer versions,..
- audio: delay no longer saved in audio profile
- audio: don't down-mix 6+ channel audio unless it's necessary
- avisynth: make sure DGDecNV is only used if width&height <= 2048
- avisynth: tweaking setMTMode calls
- avisynth: disable MT if no fitlers are used that benefit from it e.g. just source filter and resize/crop
- avisynth: avisynth script view will now be shown in a separate window instead of a popup window
- avisynth: always set SetMemoryMax
- avisynth: make sure there's only one ConvertToYv12 call in the avisynth script (additional calls didn't hurt, but made the script more confusing)
- extract: H.264 from vfr .avi into mp4 container to not loose timecodes
- input: always use 'height&width' instead of 'original height&width' from MediaInfos output
- output: removed '_raw' from file name when extracting raw content
- preview: scaling down preview window if > desktop resolution
- refactoring, lowering complexity
- show x264 [info] output in log again
- subtitle: use av input path as default path on import subtitle if no subtitle has been loaded before,..
- x264: set 'Restriction Settings->Multi-slice' to 'disabled' when disabling 'Restriction Settings->Hardware' or selecting 'Restriction Settings->Hardware' to anything but 'Blu-ray/AVCHD'
- x264: enabling 'non-deterministic encoding' by default
*added*
- avisynth: Levels(...)
- avisynth: support for LSMASHVideoSource
- avisynth: QTGMCs 'Select' got a new alternative 'FPSDiv' which calls QTGMC with FPSDivisor=2
- avisynth: vinverse
- avisynth: option to force decoding through avisynth even if it's not needed
- log: added context menu with 'clear' and 'copy to clipboard' to log in Main- and Log-tab
- muxing: option to add/remove the 'avc-1' brand for H.264 content while muxing to mp4 with MP4Box
- output: options to remove/add audioID, audioDelay, interalID from .raw output name
- x264: support for '--opencl' (Hybrid checks 'x264 --fullhelp' to check if the used version supports OpenCL or not)
- x264: changed default auto-lookahead-thread-divisor from 6 to 4 and added option to change the divisor
*removed*
- mkv: header removal compression settings from all tabs aside from Config->Output->Container settings
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
30.03.2013 14:47 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2013.03.30.0:
*fixed*
- processing: all video stream were set to 25fps during job processing
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
30.03.2013 21:19 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2013.04.08:
*changed*
- x264: adjusted x264 lookahead auto thread calculation to x264 r2260
- x264: removed x264 lookahead auto divisor after reading http://forum.doom9.org/showthread.php?t=163901
- debug: added qt version to debugOutput infos
- x264: some cosmetic changes in the x264-tab
- avisynth: output infos when Avisynth and avsInfo versions do not match
- jobs: rewrote pause/resume/rest code to be more flexible
*added*
*fixed*
- input: handling of stretched mkv streams
- input: typo during ffmpeg analysis which hindered the detection of the stream length (only needed if MediaInfo fails)
- avisynth: TFM on it's own didn't work
- avisynth: remove 'distributor()' from input script on audio extraction
- model: Prefer Original Frame rate setting wasn't loaded from a saved model :/
- model: crash when load/save/reset selected was pressed, before the dropDown box changed it's value
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
08.04.2013 19:29 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
Themenstarter
|
|
Hybrid rev 2013.04.09.1:
*changed*
- preview: use '-ao win32' during windows preview
(otherwise playback will stop if another device has exclusive audio device access)
*fixed*
- subtitle: extraction from mpls/m2ts didn't work due to mistake on metadata file creation
- avisynth: wasn't used during decoding for DVD input even if the matching option was enabled
-> downloads: http://www.selur.de/downloads
Cu Selur
__________________ Hybrid
|
|
09.04.2013 23:17 |
|
|
|
|
|
|