Problem mit Flaskmpeg und CCE.... |
Atreides
Grünschnabel
Dabei seit: 02.05.2003
Beiträge: 4
|
|
Problem mit Flaskmpeg und CCE.... |
|
Hier moechte Ich mich bei jedem in diese Forum entsculdigen, weil mein duetch is nicht so gut, dass Ich musste mein post auf Engish schreiben.
Dear Friends,
I`ve treid to convert a DVD to VCD using Flaskmpeg ver. 0.6 and as "output format" I`ve used CinemaCraft MPEG -2/1 using CCE SP /SSG Ver. 2,62,01.01.
Here are my output format options.
1.System tab --> 2048 Packet Size
2.Vedo --> MPEG-1, Add sequence end code enabled, aspect ratio DAR 4:3
3.Bitrate --> CBR, information file disabled, Bitrate set to 1150
4.Quality --> Quality priority set to 25, Anti noise filter enable set to 6
5.GOP --> as default "Restrict Auto I insertion and Close All GOP`s" unchecked
6.Audio -->Bitrate set to 224, stereo , Enable CRC checked
In the Global Project Setting Options
1.Video --> I`ve chosen the VCD NTSC template. with 29.97 fps as time base.
2.Audio --> Decode Audio, 44100Hz, "same as input" optin not checked.
3.Post Processing --> HQ Bicubic Filtering selected, No Crop, No Letterboxind, Keep Aspect Ration Checked.
4.General --> Compile whole file selected.Search Size set to 5000.
The problem is that when I want to write the encoded file to CD using Nero I`ve get this message:
The following problems were found:
-Stream encodnig which is created for a [Super]Video CD.
-invalid Video Stream 29.97 frames/second , 352*288 pioxels.
So what should I do??? Any help is highly appreciated.
Regardz,
Atreides.
Selbst-verstaendlich, koennt Euch in Deutch beantwoerten.
|
|
02.05.2003 13:38 |
|
|
Jensenmann
Super Moderator
Dabei seit: 16.03.2002
Beiträge: 2.756
|
|
Hi Fremder
, willkommen bei uns
so auf den ersten Blick weichen deine Einstellungen von den *Standards* ab, die Nero zum Brennen einer VCD haben will.
Du hast ja NTSC mit 29,97 fps gewählt mit 352x288 Pixels => dies gilt aber für PAL mit 25 fps.
Für NTSC mit 29,97fps hättest du 352 x 240 pixels wählen müssen.
Eine gute Übersicht, was als Standard einzustellen ist, findest du unter
http://www.dvdrhelp.com
und schau dir mal die Rubrik *What is* ==> VCD an
Falls dann noch Probleme sind, meld dich ruhig wieder
__________________ mit multimedialen Gruss
Jensenmann
|
|
02.05.2003 13:49 |
|
|
Atreides
Grünschnabel
Dabei seit: 02.05.2003
Beiträge: 4
Themenstarter
|
|
Thanx for the quick reply.I`m trying to encode the movie right now.As soon as the process is finished, I`ll inform you.
Million thanx.
|
|
02.05.2003 14:29 |
|
|
Atreides
Grünschnabel
Dabei seit: 02.05.2003
Beiträge: 4
Themenstarter
|
|
Now I only get the "Stream encoding which is invalid for a [Super] Video CD" error, what could be wrong now??
While viewing in the Flaskmpeg, the status is as follows:
Video Size : 352*240
FPS: 23.976
Detected FPs: 23.976
Aspect Ratio : 1.0
Bitrate : 1150000
Video Structure : Progressive
Regardz,
Atreides
|
|
02.05.2003 16:36 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
|
|
Maybe vcdgear can fix the stream via it's mpeg=>mpeg option. (could be that the packet size is wrong)
Zitat: |
VCD - Video CD 2.0:
Audio Specifications
Audio: MPEG-1, Layer-II
Bit Rate: fixed at 224kbps
Audio Channels: 1 stereo or 2 mono
Surround Sound: Stereo with Dolby pro-logic
Video Specifications
Video: MPEG-1
Bit Rate: 1.15 mbps (1177.6 kbps)
Resolution NTSC: 352 x 240
Resolution PAL: 352 x 288
Video Refresh Rate
PAL: 25 images/second
NTSC: 29.97 images/second
Movie: 23.976 images/second
Still Picture
Type: MPEG-1
NTSC: 352 x 240, 704 x 480
PAL: 352 x 288, 704 x 576
Additional values VCD
Total audio/video bitrate: 1401.6 kbps
Sector Rate: Fixed to 75Hz
CD Sector size: 2352
CD packet size: 2324 video
CD packet size: 2304 audio
CDDA Tracks: Optional
CDI subdirectory: Mandatory
Overlay Graphics and Text: Not used
|
(source)
Cu Selur
__________________ Hybrid
|
|
02.05.2003 17:30 |
|
|
Atreides
Grünschnabel
Dabei seit: 02.05.2003
Beiträge: 4
Themenstarter
|
|
Thanx, I`ve used VCDgear, and it reports Invalid MPEG pack size, So how could I prevent it while using FlaskMpeg?
Thanx
|
|
02.05.2003 19:27 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
|
|
"1.System tab --> 2048 Packet Size"
It might help tos elect another packet Size, but I'm not totally sure, since I just read in some other forums that cce isn't so good with audio encoding, so it might be better to use e.g. BeSweet for the audio part.
You also might want to check out CCE encoding in FlaskMpeg
Cu Selur
__________________ Hybrid
|
|
02.05.2003 20:00 |
|
|
Selur
spamming old Newbie
Dabei seit: 13.03.2002
Beiträge: 10.933
|
|
After some more reading and testing:
It looks like the problem is with cce it multiplexes (joins audio&video) like it's necessary for a mpeg file, but (S)vcds are muxed with other packet sizes,...
So encoding should work like you did it, but after encoding you should take tmpegEnc to demux the mpeg file and bbmpeg to remux the mpeg file like it's discribed here: http://www.dvdrhelp.com/bbmpegedit.htm
just select VCD instead of SVCD and everything should work fine
Cu Selur
__________________ Hybrid
|
|
02.05.2003 20:50 |
|
|
|