*offizielles deutsches flaskmpeg & dvdtoogm board* | Druckvorschau: Hybrid(Windows/Linux): Input -> x264/Xvid/VP8

Geschrieben von Selur am 08.05.2012 um 21:55:

Hybrid rev. 2012.05.08.1:

*fixed*

audio: extraction audio from .avi with mplayer
audio: added '-strict experimantal' to the ffmpeg aac encoding calls (mac only)
audio: crash on rename call after reencoding/extration
audio: problem when fhgaacenc was enabled but not aac encoding
tools: delaycut version detection fixed
automation: autocrop and subtitle passthrough interfered,..
muxing: mkvmerge does not support 'iw' as language, added workaround to change 'iw' to 'he'
muxing: accidentally frame count made it's way into the fps options,..
avisynth: changing qtgmc->bob didn't change the displayer lables (encoding was fine -> just a cosmetic bug)
handling: handling of vfr mkv/mp4 files (remember to enable: 'Config->Automation->Matroska Settings->Scan for streched streams' and 'Config->Input settings->General settings->Always extract timecodes from mp4/mkv/ files' for vfr handling)

*added*

input: option to filter out unwanted content by extension (files with the specified extensions will be ignored)
input: drag&drop now accepts folders (in File input mode) and will also search through all sub-folder for content

*changed*

analysis: speed up interlaced analysis by adding lavthreads
package: switching to an older mplayer/mencoder build since latest builds cause problems (windows only)

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 10.05.2012 um 18:53:

Hybrid rev 2012.05.10.1:

*fixed*

audio: ac3 sample rate/channel count/bitrate combinations, before some non-valid combinations were offered.
analysis: automation - subtitle extraction + interlaced check could cause to Hybrid to stay grayed out
subs: Hybrid now automatically creates necessary mplayer/fontconfig files; otherwise subtitle preview and embedding does not work (mac only)
muxing: timecode handling for vfr->vfr

*changed*

analysis: speed up interlaced analysis by adding lavthreads

*added*

input: option to specify which files Hybrid will support as input (by extension)

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 20.05.2012 um 12:19:

Hybrid rev. 2012.05.20.1:

*fixed*

input: auto crop detection not working properly on transport stream containers
preview: audio got disabled after "Filter View" was triggered the 1st time
automation: rewrote a lot of code to handle the interactions of 'auto crop', 'pass-through subtitle', 'auto interlaced check'
input: stream selection didn't work properly for multiple video input files
input: better handling or blu-ray input and multi video input files
muxing: problem with mov muxing (on Mac OS X)

*added*

outputPath and temPath variables are now read from .ini if present

*changed*

deinterlace: auto deinterlacing will only change the deinterlaced if the content is detected as interlaced and the
deinterlacer is ment for IVTC or the content is telecine and the deinterlacer is ment for deinterlacing.
output: avi output is allowed again, as a workaround to the ffmpeg bug, I'm trying to avoid to mux raw MPEG-4 ASP to .avi; Warning: if you use Hybrid to multiplex raw MPEG-4 ASP video into an .avi file, the output container flags will be wrong.

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 23.05.2012 um 17:58:

Hybrid rev. 2012.05.23.1

*fixed*

analyse: mplayer detecting unsupported audio streams
filtering: bug in fraction<>decimal conversion
chapter: visual chapter point selection
cut: dvd cut support
audio: using ffmpegs internal encoder & sox caused output to be mono

*changed*

audio: now automatically fix audio streams with delaycut, if DVD is source and target is mp4 file

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 31.05.2012 um 22:08:

Hybrid rev. 2012.5.31.1

*fixed*

input: dvd title selection not correct when dummy tracks were detected
audio: lame encoding was called even when lame was not present
general: fixed some problems when temp/output dir was empty

*added*

cosmetics: mac os progress indication on dock icon
muxing: option to add itunes compatible subtitle infos
tools: checks if ffmpeg/mencoder support mp3lame/vorbis/aac encoding
audio: support for external faac/lame binaries

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 01.06.2012 um 16:54:

Hybrid rev 2012.06.01.1:

*fixed*

analyse: loading dvd input (was probably only broken on windows)
subtitle: extracting subtitles in the subtitle tab

*changed*

autocrop: limit amount of frames scanned for mpls files which link to multiple m2ts files

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 03.06.2012 um 07:09:

Hybrid rev. 2012.06.02.1

*fixed*

subtitle: 'Add' did not add elements to queue (when not used through automation routine)
subtitle: subtitles sometimes were created a wrong location
extraction: (mac only) exchanged mkvtoolnix with a newer version (still 5.5.0), which already includes the .264 extraction fix

*added*

avisynth: added STPresso
muxing: option to add (multiple) audio, subtitle streams and chapters in an iTunes compatible way

*changed*

autocrop: tweaked autocrop for mpls/m2ts files

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 28.06.2012 um 10:14:

Hybrid rev. 2012.06.28.1

*added*

audio: 7.1 to stereo/5.1 down mix
muxing: option to add (multiple) audio and subtitle streams in a itunes compatible way (mp4 output will also be renamed to m4v)
avisynth: added 'field matching' option to handle content that needs field matching
avisynth: option to disable ffmpegsource single-thread enforcement (you might want to update the avisynth extension)

*fixed*

subtitles: subtitles were not always properly save as UTF-8 which could destroy the content for unicode subtitles
subtitle: bunch of bugs related to text subtitle to ttxt conversion
compatibility: accidentally 29.976 instead of 29.97 was used
input: differentiate between m4v as mp4 container and raw MPEG-4 ASP
audio: problem when reencode thd audio without an ac3 core
audio: delaycut progress
audio: handling of ogg vorbis audio
automation: loop while extracting subtitles/audio infos from input
mkv: using MediaInfos StreamOrder info instead of the ID for mkv versions 0.5.2+

*changed*

resize: 'keep resize for source' is automatically forced for multiInput
audio: custom audio handling on multiInput now allows to specify which audio handling for which source,...
audio: 7.1 to stereo/5.1 down mix
muxing: option to add (multiple) audio and subtitle streams in a itunes compatible way (mp4 output will also be renamed to m4v)
cut: adjusting time codes when cutting
extract/cut: when cutting mkv material 1st cut with mkvmerge than extract with mkvextract, than remux
subtitle: rename tsMuxeR subtitle output files to contain subtitle language
subtitle: when 'All subtitles' is enabled, for transport and mkv streams all subtitles will now be extracted in one go

*Side notes*

There's a bug in mediaInfo, which as been fixed for two weeks but since there has been no new MediaInfo release, Hybrid will still suffer from it, meaning Hybrid won't always detect a/v delay on Linux&Mac.
For more details see: http://sourceforge.net/tracker/index.php?func=detail&aid=3533984&group_id=86862&atid=581181

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 04.07.2012 um 15:01:

Hybrid rev. 2012.07.04.1

*fixed*

profiles: saving a-v combo / audio profiles
profiles: a-v combo profiles not always showing up in Main-tab
input: handling of mkv files with no frame count/rate/mode info
input: crash when loading some files combined with auto routines,...
avisynth: embedding of multiple subtitle sometimes caused a crash

*added*

gimmick: iso creation for Blu-ray/AVCHD if imgBurn is installed on the system and Main->Structure is enabled
model: added option to tell Hybrid to warn if current Config-settings differ from the default Config-settings,...

*changed*

x264: allow to specify a profile even when level is 'unrestricted'

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 25.08.2012 um 18:49:

Hybrid rev. 2012.08.25.1

*fixed*

thumbs: fixed crash if thumb nail creation was active for audio only jobs
subtitle: overwriting font size didn't work
subtitle: ssa subtitle accidently got .srt extension during extraction
subtitle: subtitle language tagging sometimes did not work properly
subtitle: filtering of subtitle queue for Blu-ray
input: handling of mkv files with no frame count/rate/mode info
avisynth: disable MT support if TextSub is used
avisynth: option to disable ffmpegsource single-thread enforcement
avisynth: srt subtitle styling
preview: subtitle style overwriting not always viewable in preview
timecode: if the last time code entry is a zero, it will be removed
analyse: crash when MediaInfo detected 'Original Frame rate'- and no 'Frame rate'-info.
avc: sometimes avcLevel restriction got triggered with input instead of output resolution
job: Blu-ray + 'Queue Titles'
audio: dts-hd channel count 8 / 6 detected as 6 instead of 8
audio: automatically call to5.1 if input has 7.1 channels and output is ac3/dts
x264: crash when enabling 'minimize AVC Level'
x264: crf as zone option
x264: output naming broke if output x264-10bit/9bit was used and output name/folder contained x264 in it.
x264: progress to newest changes in r2204
input: mac build ignoring keyboard input

*added*

subtitle: option to enforce subtitling through mencoder even when avisynth filters are used
joblist: option to get via right-click to the output folder
warning: splitting from avi/mov/raw output is not supported atm.
muxing: option to create a 1min sample file from the middle during mkv creation
cuda: option to specify which gpu is used

*changed*

general: lowered mplayer/mencoder lavdthreads count to a maximum of 8 again
general: disable qaac support if Apple Application Support is not installed (comes with Quicktime and/or iTunes)
avisynth: added option to en-/disable if Hybrid converts .srt subtitles to .ass before embedding
analyse: read analyzer output as utf-8 encoded
analyse: MediaInfo detecteds 'Original Frame rate'- but no 'Frame rate'-info, 'Frame rate' is set to the value of 'Frame rate'
subtitle: copy subtitle to tempPath before using
audio: allow vbr preset 6 when fhgaacenc version >= 20120624
audio: remove qaac if 'Apple Application Support' is not installed
audio: remove fhgaacenc if WinAmp is not installed and the necessary libraries are also not present in the Hybrid folder
audio: added warning when trying to encode 7.1 audio (can't be done with Hybrid since none of it's decoders can handle 7.1 input audio properly)

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 29.08.2012 um 17:44:

Hybrid rev. 2012.08.29.1

*fixed*

x264: command line import didn't enable 'x264->Main->Restriction Settings->Hardware' when importing '--bluray-compat'
audio: don't do truehd->wav conversion, just because delaycut is enabled
audio: typo/formating when extraction audio with mplayer
decode: making sure ffmpeg also disables subtitles during decoding
preview: avisynth filtering was used in preview even if video was set to 'ignore' or 'passthrough'

*added*

analysis: option to select whether or not Hybrid will use 'Original pixel aspect ratio' or 'Pixel aspect ratio' when both are presented through the MediaInfo-analyzer

*changed*

tools: recheck tool version when the path to the tool was changed manually.

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 09.09.2012 um 22:56:

Hybrid rev. 2012.09.09.1

*fixed*

audio: ffmpeg->sox->ffmpeg problem (happend during audio encoding through ffmpeg)
audio: audio pcm vs. wav extension problem
audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
avisynth: tresh bei sRestore, had wrong value ranges
avisynth: basic sRestore-Support (remember to update the avisynthExtension)
cut: some cut-support related problems
filter: framecount: didn't adjust frame count due to deinterlacing&co
input: chapter selection vs. start/end time problem
thumb: undid some changes from last time,..
audio: adjusted Hybrid to handle completely silent audio streams (crashed since normalization&autogain didn't work)

*added*

audio: support for fdk-aac, due to license issues this is only useful for people who compile their own ffmpeg version with fdk-aac support
audio: 'dynamic range compression'-option, thanks to tebasuna51 who implemented some profiles for BeHappy which I now integrated into Hybrids sox options.
avisynth: TemporalDegrain as grainHandling option
avisynth: option to move deblocking before the deinterlacing block if an avisynth deinterlacer is used
avisynth: 'Show avisynth script'-button some one can have a look at the avisynth script Hybrid generates.
misc: additional paths to search for tools by specifying 'toolPaths' in the misc.ini

*changed*

audio: communication between sox and ffmpeg will now be done using the sox format (otherwise sox->ffmpeg seems to make problems on some sources)
audio: added '--threading' to qaac calls
audio: by default set 'Multithreading for sox' to be enabled
analyse: ignore mplayer video ids of typ png/mjpeg if input is an mp4/mov file; otherwise cover art get's interpreted as video stream
cut: adjust cut start/end times when chapter selection changed
audio: removed unneeded addional '--multi-threaded' in sox call if multithreading is enabled (cosmetics only)
infos: video 'SpeedUp' value not displayed (cosmetics only)

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 16.10.2012 um 12:28:

Hybrid rev. 2012.10.16.1

*fixed*

audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
cosmetics: F10-log showing in left corner on linux&mac systems was broken
video: calculation of maxLevel (4.0 wasn't identified as 4)
avisynth: fft3dgpu needs SetMode(5)
x264: when '--aq-mode 2' was selected '--aq-strength' got ignored,..
job: 'on queue finished' 'call external', allows to specify a command call Hybrid will execute once the queue is finished
config: device root wasn't accepted as valid path
audio: during batch processing audio queue was cleared to early
mkv: option to extract&passthrough attachements
input: auto routines aborted if an raw audio stream was present
input: DivX3.x was falsely detected as MPEG-4 (and it isn't mpeg-4 asp compatible)
input: mp4 vfr handling (mp4fpsmod update)
x264: making sure that only on 32bit systems avisynth scripts can be directly opened through x264

*added*

mkv: options to use '--engage no_simpleblocks' and '--disable-lacing'
crop/resize: option to select old 'autoCrop behavior' and to specify the number sections to be scanned by new behavior
avisynth: option to specifiy order for qtgmc input

*changed*

autocrop: change autocrop calls for some input files
crop/resize: moved AutoCrop options to 'Crop/Resize->Misc'-subtab
preview: added '-nocache' to mplayer call (fixes some avsynch issues with mkv files during preview)
cosmetics: making sure long profile names to not influence the gui width
input: removed *.m4v as raw video extension, since ipod m4v is more frequent than raw mpeg-4 asp streams
thumbnails: resize thumbnail for anamorph output
map MPA2L3 to mp3
changed a lot of internals to better handle non-ANSI based filenames

-> downloads: http://www.selur.de/downloads

Cu Selur

ps.: Mac update will come some later, having some problems building the dependencies,...

Geschrieben von Selur am 06.11.2012 um 14:44:

Hybrid rev. 2012.11.6.1

*fixed*

analyse: fixed stretch stream length analyses when no simple blocks were present
analyse: for multiple input, not all files were processed properly
analyse: handling of ac3 with 22.05kHz
analyse: Hybrid stayed grayed out when, the interlace analysis with mplayer crashed
avisynth: tivtc output frame rate calcluation for mode 2
avisynth: videoformat and interlaced result were mixed up :/
audio: when settings aac profile and than changing the channel count (e.g. by changing the downmix), aac profile changed, even when not needed
autocrop: didn't work properly for dvd input,...
batch: during intake not all files were processed properly
cut: cutting sometimes was ignored for the video stream (not sure if the problem is completely fixed )
extraction: tsMuxeR .meta files now are always coded with the current system text encoding
filtering: once dvd and non-mod4 resolution was selected filtering was disabled, but not enabled if the crop resolution was mpd4 again
input: auto audio loading was broken due to recent auto handling changes
input: batch - choosing 1st video stream for all sources
input: blu-ray input analysis
input: dvd input analyse finished not always called
input: crash on Windows XP with long file names
muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
mxuing: change speed for .avi output
muxing: ignore empty subtitles
muxing: tsmuxer meta files now are always coded with the current system text encoding
preview: window height
sample: file name mix-up during sample creation for mp4 files
srt2ttxt: fixed file naming
subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
x264: VUI color adjustment depending on input
x264: VUI color adjustment did only work if hardware restrictions were selected
xvid: missing quotes around stats file
Adjustment works this way:
1. check source contains color matrix info (if it does take the info)
2. if source has no color matrix info and is
  [list]
3. MPEG2 assume input as BT.709
4. MPEG1 assume input as BT.601
5. width*height > 720 * 576, assume BT.709
6. width*height <= 720 * 576, assume BT.601

[*]muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
[*]subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
[/list]
*changed*

analyse: only allow 16/15, 8/9, 64/45, 32/27 and 1/1 as aspect ratios for vob files (DVD input)
avisynth: use ffmpeg source for interlaced avc not DirectShowSource
checks: allow cutting if ffmpeg is set as extractor even if input is a transport stream
input: making sure ffmpeg is used instead of tsMuxeR to extract LATM muxed audio
input: 'Config->Input settings->Input Extensions->Only support' now also filters the 'Main->Input File'-dialog content.
muxing: mkvmerge: only set '--default-duration ...' if input and output fps differ, otherwise interlaced/progressive mixed content will cause problems
video: disable cuda encoder on systems without a cuda capable card

*added*

avisynth: option to use .d2v.bad instead of .d2v (workaround for, something that is probably a 'bug' in DGIndex)
crop: option to color the crop width&height spin boxes red if the widht/height value is not modulo X without rest.
decoder: option to flip rgb output when decoding is done with mencoder or avisynth
filter: option to overwrite input scan type
filter: "softpulldown + detc" and "softpulldown + filmdint" to handle mixed (progressive <> telecine) material

*removed*

filter: 'ivtc' got removed, since it seems to be broken (filmdint and detc are prefered)

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 23.11.2012 um 18:41:

Hybrid rev. 2012.11.23.1

*fixed*

audio: extraction of ac3 audio from .mpg is broken in mencoder (for at least a year!) -> Hybrid now uses mplayer instead of mencoder for the extraction of audio from .mpg files
audio: handling of 7.1 thd audio
audio: mkv strecth handling '.. to speed change' was broken
audio: mkv stretch handling coding in name
audio: normalize did not take remix into account
crop: crop resolution was not updated properly in 'Avisynth'-Crop style
cosmetics: on KDE based systems QTimeEdit wasn't initialized with 'hh:mm:ss' format
filter: autocrop for dvd input
input: dvd selection start&end time got mixed up which could cause Hybrid to always encode/passthrough the whole stream
muxing: progress indication while muxing with ffmpeg
subtitle: adding subtitle from dvd to mp4
subtitle: subtitle were not deleted even if 'delete subtitle after muxing' was enabled for mp4 output
tags: tagging was broken due to file naming changes
x264: tune->animation could trigger Hybrid to enable b-frames in base profile

*changed*

audio: dts-hd core extraction now also supported for mkv content
file: language and delay extraction from file name
filter: lower stretch stream tolerance

*added*

audio: sox 'pitch' option as 'change pitch by'
dependency: Hybrid now also uses FLVExtractCL cpp to extract flv timecodes infos
output: name generation got a new option 'use chapter name'

*removed*

audio: gain sub options, after some testing anything besides '-nb' is really useless, so switching to '-nb' and removing the option

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 30.03.2013 um 14:47:

Hybrid rev 2013.03.29:

*fixed*

audio: problem with 'adjust stretch to stream fps' mkv stretch handling.
avisynth: ivtc + multiInput
avisynth: 'resize before filtering' didn't do anything
avisynth: converttoyv12 before wrongly flagged interlaced material didn't use interlaced= true
avisynth: switching between FFmpegSource2 and DGDecNV
decode: ffmpeg + yadif bug
cosmetics: mix up with force output and custom par
input: mkv stretch handling detection
input: bug while grabbing the channel mapping
input: 'mpls ignore'-settings got ignored sometimes
muxing: cosmetics, regarding en-/disabling overwrite frame rate
output: problem when remuxing h.264 to mov
preview: combination of 'FilterView' + avisynthExtension + 'Horizontal split filter preview'
preview: normal avisynth preview as broken if input needed deinterlacing and was cropped (width only mod2); added an ugly fix by resizing to mod4 after cropping (!only for preview!)
preview: cropView sometimes used crop- instead of input-resolution
processing: pausing of some some calls didn't work
subtitle: language tag got lost during srt -> ttxt conversion
x264: limit min-keyint to max-keyint/2+1
decode: ffmpeg + yadif (custom) bug
gui: stay on top

*changed*

audio: adjusted qaac audio progress indication to newer versions,..
audio: delay no longer saved in audio profile
audio: don't down-mix 6+ channel audio unless it's necessary
avisynth: make sure DGDecNV is only used if width&height <= 2048
avisynth: tweaking setMTMode calls
avisynth: disable MT if no fitlers are used that benefit from it e.g. just source filter and resize/crop
avisynth: avisynth script view will now be shown in a separate window instead of a popup window
avisynth: always set SetMemoryMax
avisynth: make sure there's only one ConvertToYv12 call in the avisynth script (additional calls didn't hurt, but made the script more confusing)
extract: H.264 from vfr .avi into mp4 container to not loose timecodes
input: always use 'height&width' instead of 'original height&width' from MediaInfos output
output: removed '_raw' from file name when extracting raw content
preview: scaling down preview window if > desktop resolution
refactoring, lowering complexity
show x264 [info] output in log again
subtitle: use av input path as default path on import subtitle if no subtitle has been loaded before,..
x264: set 'Restriction Settings->Multi-slice' to 'disabled' when disabling 'Restriction Settings->Hardware' or selecting 'Restriction Settings->Hardware' to anything but 'Blu-ray/AVCHD'
x264: enabling 'non-deterministic encoding' by default

*added*

avisynth: Levels(...)
avisynth: support for LSMASHVideoSource
avisynth: QTGMCs 'Select' got a new alternative 'FPSDiv' which calls QTGMC with FPSDivisor=2
avisynth: vinverse
avisynth: option to force decoding through avisynth even if it's not needed
log: added context menu with 'clear' and 'copy to clipboard' to log in Main- and Log-tab
muxing: option to add/remove the 'avc-1' brand for H.264 content while muxing to mp4 with MP4Box
output: options to remove/add audioID, audioDelay, interalID from .raw output name
x264: support for '--opencl' (Hybrid checks 'x264 --fullhelp' to check if the used version supports OpenCL or not)
x264: changed default auto-lookahead-thread-divisor from 6 to 4 and added option to change the divisor

*removed*

mkv: header removal compression settings from all tabs aside from Config->Output->Container settings

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 30.03.2013 um 21:19:

Hybrid rev 2013.03.30.0:

*fixed*

processing: all video stream were set to 25fps during job processing

-> downloads: http://www.selur.de/downloads

Cu Selur

Geschrieben von Selur am 08.04.2013 um 19:29:

Hybrid rev 2013.04.08:

*changed*

x264: adjusted x264 lookahead auto thread calculation to x264 r2260
x264: removed x264 lookahead auto divisor after reading http://forum.doom9.org/showthread.php?t=163901
debug: added qt version to debugOutput infos
x264: some cosmetic changes in the x264-tab
avisynth: output infos when Avisynth and avsInfo versions do not match
jobs: rewrote pause/resume/rest code to be more flexible

*added*

resize: advanced options for auto width/height adjustment
ui: style selection (+ at the moment hidden support for styling), see: http://forum.selur.de/topic255-hybrid-and-styling.html

*fixed*

input: handling of stretched mkv streams
input: typo during ffmpeg analysis which hindered the detection of the stream length (only needed if MediaInfo fails)
avisynth: TFM on it's own didn't work
avisynth: remove 'distributor()' from input script on audio extraction
model: Prefer Original Frame rate setting wasn't loaded from a saved model :/
model: crash when load/save/reset selected was pressed, before the dropDown box changed it's value

-> downloads: http://www.selur.de/downloads

Cu Selur